Heat Exchanger
Steam Pressure reduction is basic need of every process plant Strainer, as it is always recommended to operate boiler at its rated pressure, distribute steam at higher pressure & use the lowest possible steam pressure at utilisation point.
Finned Tube Type Heat Exchanger
The Finned Tube type Heat exchanger are used to heat or cool the Cold media Air with medias like Steam, Cooling Water or Hot Oil inside the tubes. The fins enhance the heat transfer rate by increasing the effective heat transfer area between the tubes, fins and surrounding.
Shell & Tube Heat Exchanger
Widely used Heat exchangers, Majority for Heating application. One media flow through the tube and other media over the tubes in the shell, so as to exchange of the heat.
Tubular Heat Exchanger
These type of HE are used to transfer heat between two Fluids. It facilitates both heating and cooling applications.
​
The unique feature is that it is a fully welded construction with a bellow-on-shell tube to absorb thermal expansion. Shell Tube consist of Tubes inside it, in which another media flows.
​
Tubular Heat exchanger are typically connected in series and mounted on a frame. The shell tube is always smooth while the product tube is either corrugated or smooth depending on the application.
​
Particularly used in Food industries.
Plate Type Heat Exchanger
The flow of fluid inside the heat exchanger is divided into several parallel streams as per no of plates. Inlet and outlet nozzles at the corners of the plates allow hot and cold fluids flow through alternating channels in the exchanger. These are gasketed pHE.
Plate Coil Heat Exchanger
These are steam based heating plates ( Laser Welded type) to heat water in tanks, vessels, etc.
The plate coils have inlet & outlet nozzles for steam insertion and condensate removal.
Manufactured & designed as per specific application and required parameter.
Submersible Heat Exchanger
Widely used Heat exchangers, Majority for Heating application. One media flow through the tube and other media over the tubes in the shell, so as to exchange of the heat.